Home

XJ axle width

XJ/ZJ/WJ Axle Information - HK Offroa

  1. Width: 58 1/4 wide (2 narrower then XJ or ZJ) Notes: 8.8's out of rangers and mustangs will not work, so be careful. A common upgrade is the Super88 which comes with larger axles. Very strong with stock axles and many came with limited slip, 4.10 gears, and disk brakes stock. Front axle upgrades for WJ D30's (65 width axles
  2. And just to add a little more uncertainty,1996 was the transition year. Some XJ's manufactured in late 1996 got the 29 spline 8.25 also. I swapped a 29 spline 8.25 out of a 1996 XJ into my old 1988 XJ
  3. Re: Stock XJ rear end width??? Post by IH 392 » May 9th, 2009, 6:47 pm Go for the Cherokee 44 or the Sploder 8.8, the 8.8 is about 1 1/2-2 NARROWER than the Cherokee axle and these are the ONLY two options you have listed that will not require new wheels or redrilled axle to have the correct wheel bolt pattern
  4. Stock tire sizes are 215 / 75 on 15 inch rims at the front, and 215 / 75 on 15 inch rims at the rear. For stopping power, the Cherokee (XJ) 4.0i braking system includes Vented Discs at the front and Drums at the rear. The Cherokee (XJ) model is a car manufactured by Jeep, sold new from year 1991 until 1993, and available after that as a used car

Now a late 1970's dana 44 full width axle, 12.5 wide tires, and humvee 7 BS wheels has an overall width of 74:grinpimp: I've got a 10 bolt front and a 14 bolt rear on my 01 xj. With 5 backspacing wheels and 37 12.5 tires I am at 81 inches wide. If I remember correctly I was at 76 with my old 32's and 3.25 back spacing Jeep Cherokee front axles form the platform of your off-road rig. A robust set of axles can leverage you over obstacles or keep you stable through a slide. If you're ready to start tooling with your off-road performance, you might want to start with a simple Jeep XJ axle swap. Rear Wheel vs. 4-Wheel Driv An inch per side. You will need wheel spacers $50-$100 and a flange adapter, another $50-$75 and still need more gear for 35s. A 8.8 is not all it is cracked up to be. A 29 SPL 8.25 is just as strong as a 8.8, does not need wheel spacers or a flange adapter. You are already ahead by $100-$175 by using a cheap, easy to find 8.25 XJ axle Chevy Dana 44 width possibilities using stock length axle shafts: (Axle widths are, WMS-WMS - wheel-mounting-surface to wheel-mounting-surface. Perch widths are center to center) 69 wide, 31.5 perches- stock Chevy 8-lug 68.75 wide, 31.5 perches- Chevy axle with Ford 5-lug outers 67.5 wide, 31.5 spring perch centers- stock Chevy 6-lu

XJ and MJ axle width - MJ Tech: Modification and Repairs

A Currie 9-inch axle assembly is the perfect performance upgrade for your Jeep XJ Cherokee. Built to the legendary Currie Standard with a new Currie Centurion heavy-duty 9-inch housing with, billet large bearing ends, and 31-spline performance axles, this rear axle assembly provides a serious upgrade over the stock unit that will provide years of dependable four-wheel adventure Dana 44 non c-clip - 30 spline, 1.31 diameter shafts, 8.5 ring gear, 2.75 axle tube - used 87-89 on XJs equipped with towing package When swapping front axles on FSJs, the spring perch width of the front axle can really put a damper on your options. Here are some FSJ dimensions and other potentially important measurements. '63-'73 Wagoneer and Cherokee spring perch width: 32 inches. '63-'73 J-truck and M-715 spring perch width: 39 inches

Toyota Axle Widths. Toyota axle widths! If you want to do an axle swap, you gotta know 'em. Here are all dimensions and factoids you need like spring perch width, pinion drop, and brake type. Let's get to it! Deals! Save $100 on BFG Tires at 4 Wheel Parts. Coupon code: 10% off $500 or more at 4 Wheel Parts (SD4WP10OFF Axle widths http://www.pirate4x4.com/forum/showthread.php?t=456358 Early CJ5's were 48.44 and the Ramblers were 51.5. This is quite a bit of difference The Ford radius arms can be retained and used under the XJ and the rear 9 is a direct swap - the perches line directly up. The 9 is also a big bearing 31 spline unit. These axles are way narrower than the HP60s; the 1/2 ton HP44 is 65.5 wms-wms and the matching 9 is 64 wms-wms. FYI, stock XJ axle width is 60.5 wms-wms

AXLE INFO: - Jeep Cherokee Forum

The Jeep Cherokee (XJ) is a compact sport utility vehicle manufactured and marketed across a single generation by Jeep in the United States from 1983 to 2001 — and globally through 2014. It was available in three- or five-door, five passenger, front engine, rear- or four-wheel drive configurations. Sharing the name of the original full-size Cherokee SJ model, the 1984 XJ Cherokee was Jeep's. Tread width is usually narrower than WMS to WMS because of the off set the center of tire is farther inboard than WMS. Use this chart for comparison. CJ8s can have both wide and narrow factory axles. The J-10 axle is wider than a NT and narrower than a WT. '41 to 45 Jeep MB: 48.25. '46 up CJ-2A, CJ-3A : 48.25. '49-65 Jeep Utility Wagon: 57 1,802 Posts. #20 · Dec 20, 2008. I was considering putting a jk 44 up front and running my 8.8 with adapter spacers out back to widen and change bolt patterns. The jk axles are 5 wider than stock XJ/TJ/yj axles. $1300 at 4wd Hardware for a front Mopar 44 sounded good until I found an hp 60 for $450

Stock XJ rear end width??? - Jeep Stroker

  1. 2000 Jeep® Cherokee PRODUCT INFORMATION CONTINUED JEEP® CHEROKEE PRODUCT INFORMATION 17 Specifications TRANSMISSION: AS72 - MANUAL, FIVE-SPEED, OVERDRIVE (W/2.5-LITER ENGINE) Description _____All forward ratios synchronize
  2. 1 Dana 25/27 2 Dana 30 3 Axle Specs 4 Gear/Carrier Specs 5 Dana 35 5.1 Axle Specs 5.2 Gear/Carrier specs 6 Dana 44 6.1 Specs 6.2 Factory Dana 44s 7 Chrysler 8.25 8 Dana 60 9 Dana 70 10 AMC 20 yo Model 30: Drive-type, full floating axle with open end steering knuckles mounted on ball studs. Model 30 Front Axle: CJ-5, CJ-7, Scrambler, YJ, XJ and TJ. Front Axles Dana 30 high pinion - reverse cut.
  3. Currie® 44 high-pinion front axle for Jeep TJ/LJ/XJ vehicles, is a direct bolt-in assembly with superior strength in a light-weight package that's designed for heavy off-road useCurrie 44 Features: High-Pinion Massively Reinforced Center SectionLarger, Stronger JK Ring and Pinion Gears4340 Chromoly Axles with Larger Rubicon U-Joints3-inch Diameter x .5 in. Wall DOM Axle Tubes Massive Forged.

Jeep Cherokee (XJ) 4

Larger and stronger axle and U-joints. Variations - Varying widths, Some reverse cut models, CJ models featured hubs, YJ until 1994 features vacuum actuated axle disconnect, Right and left side off-set, Drum and disc brakes. Dana 27. Key identifiers - 10 bolt cover, most commonly a front axle; Came in - 66-71 Jeep CJ; Ring Gear - 7.2 How to identify your XJ axle and the original gear ratio OEM Tech Discussion PART # CODE YEAR FOUND ON THESE VEHICLES AXLE TYPE RATIO DIFFERENTIAL TYPE E 1986 Cherokee, Wagoneer & Comanche 35 3.54 NL K 1986 Cherokee, Wagoneer & Comanche 35 4.11 NL KK 1986 Cherokee, Wagoneer & Comanche 35 4.11 LS S 1984 - 85 Cherokee & Wagoneer 35 3.73 NL T.

Downsides to fullwidth axles on XJ? Pirate 4x

  1. The XJ Dana 35 axle measures 2.64 in diameter, necking down quite a bit to 2.48 at the diff. Cherokee XJ Dana 44 The axle tubes on my Dana 44 have been welded to the center casting... a good idea on the Dana 35, but overkill here. The Dana 44 axle is an extremely popular upgrade for small to mid-sized Jeeps and other 4x4s
  2. Swapping Early Bronco axles into the XJ. Originated from a post on the NAXJA Modifications Tech Forum by FarmerMatt. I'll start with the front axle. The early Bronco (EB) front is exactly the right width so no housing modifications are needed. The spring perches are also correct & the XJ springs will bolt right in
  3. The illustration below will help identify the axle in your Jeep. The Bill of Materials, or B.O.M., is the number stamped on the right or left hand tube of the axle. This will help identify the parts needed out of a Spicer catalog
  4. Currie 9-inch rear axle for the Jeep XJ Cherokee is built to match the vehicle's stock axle width, pinion offset, suspension mounting locations, and wheel bolt pattern for a straightforward, hassle-free installation. Built to the legendary Currie Standard with features that include
  5. Tapered roller bearings on Stub axles standard 3.31 gears with locker optional 61 3/4″ wide. XJ6 - 79-88 (Series III) Girling Callipers 1/2″ Rotors Tapered roller bearings on stub axles with Drain hole in Stub axle flange 2.88 Gears Locker optional 61 3/4″ wide. XJ6/XJ40 - 88-9
  6. Full width is a subjective term. Are you talking 65ish wide 1/2 or 3/4 ton axles, like a 9 rear and 44 front? Or are you talking about nearly 70 wide 1 ton axles? Both are commonly referred to as full width

Concise Guide to Jeep Cherokee XJ Front Axles 4WD

Jeep Cherokee (XJ) 4.0i auto Size, Dimensions, Aerodynamics and Weight. Wheelbase : 258 cm or 101.57 inches. Length : 424 cm or 166.93 inches. Width : 179 cm or 70.47 inches 01 XJ full width axles? If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register. How different are TJ axles from XJ axles, is it the width? Also do you know if a trans case from a Rubicon would bolt in where my 231 is or just need an adapter? That would be awesome!! Mark Horne. Reply. XJ_HORNE New Member. Joined Jun 17, 2006 Location Pelzer,sc. Jun 25, 2006 #1 Lug Pattern: 6-on-5.5 and 8-on-6.5 (some truck) Good For: It's basically a full-width axle (66 inches wide), good for light-duty full-width conversions on CJs, YJs, TJs, XJs and others with a.

Jeep Axle: Dana 44. Several variations of the Dana 44 have been used as the rear axle in Jeeps, all of them use a 8.5 ring and pinion. The Dana 44s with the two piece shafts are 19 spline or 27 spline and the versions wih the once piece shafts are 30 spline. The R&P ratio ranges supported by the carriers are 2.87-3.73 and 3.92-5.89 There are two TJ rear D44s. One with a limited slip and one with the Rubicon locker. Both are the right width and take a larger U joint, 1330 vs 1310 for the XJ How to identify your XJ or MJ Jeep's factory axle & what's in it! This page contains Cherokee, Wagoneer, and Comanche Axle ID Numbers as well as drawings and pictures (where possible) of the axle housings to help you identify which axle / differential came on your Jeep. I only have data going up to 1997 so if you can add to this list it would. The dimensions vary slightly for each year's model. The Jeep XJ's length ranges from 165.3 (4,199 mm) to 169.2 in (4,298 mm) The width ranges from 67.7 in (1,720 mm) to 70.9 in (1,793 mm), with the height ranging from 63.3 in (1,608 mm) to 66.9 in (1,699 mm). Its curb weight is approximately 3,357 lb (1,523 kg) Jeep Axles. Upgrades. Factory Options. General. This Dana 30 features an open knuckle design with 7 1/5 ring gear. Although the same model axle has been used for almost 25 years, they are not compatible. There are numerous various in brakes, hubs, differential orientation, wheel bolt pattern, and width. The R&P ratio ranges supported by the.

XJ and MJ axle width - Page 2 - MJ Tech: Modification and

Jeep TJ/XJ Waggy Front 44 Swap Kit/Truss-- Looking for a jeep width axle to swap into your TJ/XJ? The 1980-1981 and 1985-91 Jeep Wagoneer front Dana 44 is a popular option due to it's width, driverside drop, factory disc brakes, many steering options, available locking hub options, and increased strength over the Dana 30 found in most TJs/XJs Key Product Features: Coil pad locations optimized for the XJ/ZJ/TJ/LJ. Integrated coil retainer plates. High strength/low profile C to C truss. Upper and lower C gussets. Combination of 3/6,1/4, and 3/8 thick plate steel. Tab and slot construction for easy assembly. Shock mounts are moved outboard and eliminate bar pins

The Chrysler 8.25 rear axle is a c-clip, non ABS axle that was used in 1991 ? 1996 Cherokees with 27-spline axle shafts and 1997-01 Cherokees and Liberties with 29-spline axle shafts. Even the most powerful off-road truck needs a good set of supporting axles in order to move forward properly This Spicer 8.25 axle is common among Mopar rear wheel drive and 4x4 vehicles, most commonly used on the Jeep Cherokee (XJ) from the 1991 through the 2001 model years. Some early Mopar rear wheel drive cars also used it; as did some Dodge Dakota pickups and Dodge Durango SUVs also used the 8.25 axle, albeit with a greater width 1 SJ 1.1 Development 1.2 Performance 1.3 Mechanicals 1.4 Around the world 1.5 Awards 2 XJ 2.1 1984-1996 2.1.1 Engines 2.2 1997-2001 2.2.1 Engines 2.2.2 Trim levels 2.3 Available driveline components 2.3.1 Manual transmissions 2.3.2 Automatic transmissions 2.3.3 Transfer cases 2.3.4 Axles 2.3.4.1 Front Axle 2.3.4.2 Rear Axle 2.3.4.3 Axle Gear Ratios 2.3.5 Suspension 2.3.5.1 Front suspension 2.3.

The following is a general list of rear ends and their dimensions to help narrow the search for a possible candidate to replace the torque tube rear end or just get a better set of gears for highway driving. Advance Design Trucks seem to be using rear ends with widths ranging from 58- 62. I'm not sure of the Task Force width ranges at this time Jeep TJ/XJ Full Width Front 44 Swap Kit/Truss-- Full Width Dana 44 Swap Kit (For TJ/LJ/XJ/MJ) The early Ford Dana 44 is a popular option due to it's wider width, availability with a matching 9 rear, driverside drop, factory disc brakes (76+), many steering options, available locking hub options, and increased strength over the Dana 30 found in most TJs/XJs These are complete, fully assembled, Bolt-In* replacement Heavy Duty housings for your Jeep TJ/LJ/XJ/YJ utilizing a JK 44 Housing in the front, with stock TJ/LJ/XJ/YJ mounting brackets and coil spring buckets. This give you the JK width eliminating the need for wheel spacers, larger JK axles and U-Joints, and larger JK brakes. Features High.

Axle widths - JeepForum

1.Jeep JK shocks = slight mod to fit 2-4 lift (must be from Jeep JK Rubicon, you need to press out the metal sleeves from the Jeep JK shocks, and insert the Jeep XJ stock bar pins to the axle-side part of the front shocks, and the body-side of the rear shocks. XJ Axle Upgrades Paul Weitlauf gives a detailed look at how he performed some major upgrades to his XJ axles without spending major money in the process. A full floating 5 on 5.5 wheel bolt pattern reverse rotation Dana 30 front and a Dana 44 rear are the results of his efforts If you need width, look for the 73-inch-wide van axle. While there is a narrow 63-inch-wide version, the more common ranges span between 65-67 inches. 1995½-1999 Jeep Cherokee Non-Disconnect Dana.

84-01 XJ Cherokee - Currie Enterprise

Bolt pattern: 5 on 4.5″ — same as stock D30 & D35 on a YJ/TJ/XJ/MJ/ZJ. Could this be redrilled to 5 on 5.5″ or 6 on 5.5″ to match another D44 front axle? Probably not, due to insufficient flange material outside the stock studs Width: 60.25″ — virtually identical to stock YJ/TJ/XJ/MJ Brakes: 10×2.5″ drums, vs the 9″ drums on a. Base Axle Includes: * High Pinion Front Axle Housing C to C * TJ, XJ, ZJ Brackets * New 1310 U-Bolt Yoke * Your Choice of Ratio * 1/2 x 3.0 Wall Axle Tubes * Chromoly Inner 30 Spline Shafts an

xj rear spring swap - Pirate4x4

Available in 2 standard widths to fit Sport, Sport X, Sahara and Rubicon; ProRock 44 assemblies for the 2007-2018 Jeep Wrangler (JK) and Jeep TJ and XJ have these additional features: Heavy-duty 3-inch diameter axle tubes with .316-inch or optional .500-inch wall thicknes Yukon Gear & Axle Dana 30 Outer Stub Axle Shaft with 27 Spline For Jeep Wrangler TJ, YJ & Cherokee XJ. $112.99. 5. (1) Crown Automotive Dana 30 Passenger Side Axle Shaft Assembly for 87-06 Jeep Wrangler YJ & TJ and 84-01 Cherokee XJ. $229.99. 5. (1) Ten Factory 27 Spline Rear Axle Kit for 90-06 Jeep Cherokee XJ, Wrangler YJ, TJ & Unlimited with.

Swapping the XJ front suspension from 4-link coil to Spring Over Axle Leaf springs measured the width between the centring pins of the leaf packs (dimension A). I then measured the width of the axle from inner knuckle to inner knuckle (dimension B). Subtract A from B, result is C. Divide C by 2, result is D. Measure from inner knuckle (same. Find you a 1985-86 rotten body chevy with good drive train and swap the whole thing over. 350 motor/ TH400 and if your lucky 700r4 tranny/ NP208 transfer case/ Dana 44 front axle/ GM 14bolt rear end, and I see them for sale often under $1500. Sounds like a fun project. I've been wanting to do a similar project myself I am running full width axles, D44 & 9, and my 35 x 12.50's are almost completely outside the body. Those are 33's in the pic, but are the same width. Not sure the backspace on the wheels as they came with the axles. You are most likely going to have to research the available backspace you can get to fit your axles and measure from there Features of our Ford 8.8 install kit are as follows: same lug nut bolt pattern; disc brakes ('95 & newer); 31 spline axle shafts; 8.8 diameter ring gear (D35 is 7.5); 120% stronger than D35; only 20 pounds more than D35; trac-loc differential stock; and 3-1/4 diameter tubes (strong!). You now need to find the c The Model 30 Front Axle listed directly below is shown as a passenger side drop, most late model Jeeps will have a drivers side drop but for parts references they are similar. Item. Description. 1. Outer axle dust shield (1985-00 XJ Cherokee) 2. Spicer axle shaft universal joint per axle, non-greaseable style (1985-94 XJ Cherokee, 1992-94.

Jeep Axle Mount 1984-2018+, JK/TJ/LJ/XJ/ZJ | Clayton Offroad

60.50 inch Overall Width; Requires Use Of TJ/ XJ Axle Shafts; Reuses TJ/XJ Knuckles Out. California Residents: WARNING + View More Specs - View Less Specs. Lowest Price! Guaranteed! $2,661.99 ADD TO CART. Add Protection Plan for $266.20 ? Ships Directly From. To find your Jeep Cherokee Front Axle Assembly from a RECYCLER NEAR YOU, just enter the YEAR of your vehicle and your ZIP code in the above form and press the FIND button.(What you see below is a previous search for a Jeep Cherokee Front Axle Assembly and does not include all the Front Axle Assemblies in YOUR area.

XJ Specs.Everything you need to know. Jeep ..

Triangulated TJ 14-bolt 1-ton Swap Kit with Truss. Swap in a GM 10.5 14-bolt rear axle axle and eliminate the tracbar. $424.99. Call for Availability. Select Options. Quick View. JK2TJ Triangulated Swap Kit with Truss. Swap in a JK44 axle and eliminate the tracbar. $454.99 This item: Dana Spicer Front Axle U Joint Set for Dana 30/44 Jeep TJ YJ XJ 1986-2006 $69.43. In Stock. Ships from and sold by Platinum Performance Parts. Detroit Axle - Front Wheel Hub and Bearings Assembly Replacement for Jeep Grand Cherokee Wrangler $69.96 ( $34.98 / 1 Count) In Stock. Ships from and sold by Detroit Axle The stock XJ axle shaft dimensions. Dimension for the custom chafts I ordered from Moser (pictured above). Part 4 - Doing the work: Step 1 is cutting the stock XJ inner knuckles off the axle, without damaging the axle tube, as the axle tube is not being shortened. It helps to cut a relief section out of the yoke (inner knuckle) Replaces coil bucket, shock mounts, tracbar bracket, steering stabilizer bracket and anti-sway bar mounts for TJ, LJ, XJ, and ZJ front axle. Weight: 15.1 lbs Dimensions: 6 x 9 x 12. Availability: Call for Availability

Common Axle WMS BentFrame 4X

Front Axle Truss JK Rubicon D44 Swap To Jeep TJ/LJ/XJ/ZJ/MJ TNT Customs. Swap a Jeep JK Rubicon 44 into your Jeep TJ/LJ/XJ/MJ OR ZJ! If you're thinking of swapping a Jeep Wrangler JK Dana 44 into your Jeep TJ/LJ/XJ/ZJ or MJ, this is for you. TNT's JK Dana 44 Differential Truss is an easy way to strengthen your front housing and end up with beefier axle brackets and components XJ-TJ Jeep Combo Bracket Upgrade Kit We have designed a solution for JEEP XJ or TJ owners with the D30 coil suspension setup. The stock brackets are thin and likely to bend, dent and possibly tear right off of the axle tube with enough stress. Our Jeep Ultimate bracket combines the coil mounts, shock mounts, trac-bar Description. Our Jeep TJ, LJ, MJ, XJ, and ZJ, front axle track bar bracket is a direct replacement for your factory front axle track bar bracket. This bracket is a perfect solution if the track bar bracket bolt hole in your existing bracket is wallowed out. This bracket is manufactured from 3/16 steel making it much thicker and stronger than.

Experience the thrill and ease of tailoring your Truck or Jeep with our Guaranteed Lowest Prices on all Dana 44 Complete Axle Assemblies products at 4WP. Providing Expert Advice with over 35 Years of Experience and Free Shipping on Orders Over $99 Trail Forged HD front axle bushing upgrade kit. Front upper control arm bushings (axle side) for most Jeep models (XJ, MJ, YJ, ZJ, TJ, LJ, WJ, JK) with factory Dana 30 or 44 axles. These are a precision made, top quality factory style rubber bushing with some major upgrades: 1/2″ bolt hole is the largest size of any factory style rubber. The Motobilt Jeep YJ full width axle conversion kit is a simple way to install a Chevy Dana 44 or Dana 60 front axle in your Jeep YJ. This kit also works with older model Ford 44 and 60 fronts from the 78/79 range. This kit fits Jeep YJ's from 1987 to 1995. Motobilt offers high quality fabricated parts for the DIY fabricator

The Jeep Dana 30

Toyota Axle Widths: 21 of 'em for Axle Swaps - Roundforg

if you get a dana 44 out of an XJ, then its a direct bolt in aside from a slight difference in length front to rear. the pinion yoke will be about a half inch off from what i've read (i'm scouring yards for a D44 XJ axle) along with a brake line breather that's different (it doesn't go up through the junction block thing like a D35 or a 8.25 does, and the U bolts are different, so you'd need. Re: full width axles in xj « Reply #5 on: October 16, 2010, 07:26:03 PM » the chev front 44 is not your best axle to swap in the front as mentioned due to the passanger drop, but some have done it. try to find an early 70's ford dana 44 HP with the weld on wedges You can make narrow width axles work, but you better get used to swapping axles shafts. If you're running an AW4 automatic, a good gearing ratio for 37-inch tires is 4.88:1 or 5.13:1 gears. If your Jeep is equipped with an AX-15 automatic you'll probably want 4.56:1 gears All Chrysler 8.25 axles are c-clip. 91-96 XJ: Chrysler 8.25 - 27 spline, 1.17 diameter shafts, 8.25 ring gear, 3 axle tube 97-01 XJ: Chrysler 8.25 - 29 spline, 1.21 diameter shafts, 8.25 ring gear, 3 axle tube The switchover to 29 spline is believed to happen in late May of 1996 27 and 29 spline comparison The carriers are different due to the spline count the housing Anyone out there that knows the width of the xj 40 axle? Planning on putting a jag axle on my -57 Chevy Panel truck 61 wide would be perfect Ferrofil, Sep 16, 2013. SHARE POST #24. Joined: Jun 19, 2006 Posts: 9,351. Profile Page. 55 dude. Member. from Wa. The Wet Side! 49-51 Mercs - Everything and Anything.

Jaguar XJ features and specs at Car and Driver. Learn more about Price, Engine Type, MPG, and complete safety and warranty information They can be found in 1973 and newer A body cars with the 4.5 BBP axles. There were two different housings. One came with 2.21:1, 2.45:1, & 2.71:1. The other with 2.94:1 and higher gear sets. The 8.25 can also be found in 1984 to 2001 XJ Jeep Cherokees (note the year split for the axle spline). • XJ Jeep Cherokee 1984 - 1996 = 27 spline axles I'm pretty sure the axle width is the same between the XJ, TJ and KJ. If you were thinking of getting a set of those JK Rubicon axles that Mopar performance sells to do an axle swap, they are at least 5 inches wider than a standard TJ axle. Plus the bolt pattern is different

CJ Full width axle kits - Pirate4x4Jeep CJ Full-Width Axle KitFishbone Offroad Bullhead Front Bumpers for 84-01 Jeep

Jeep Cherokee Lift Blocks. Select Lift Height 1/2 lift - $13 1 lift - $26 1 1/2 lift - $39 2 lift - $52. Jeep Cherokee Axle Shims. Steel shims help keep driveline angles correct to help with vibration, prevent U-joint binding, and help fight spring wrap if your pinion is sticking up a bit too high. We carry different sized shims for. I have posted up before about my XJ, and I am at the crossroads with my front axle. I know that the smart thing to do (at least for the long run) is to get a beefier set up versus just polishing the Dana 30. The more I have been reading, the more I am wondering if a JK D44 swap would be a good bet for me. I would be looking at front and rear to keep things matched up Check the width of the front axle, and find a D60 or HeavyD44 the similar width. Good donors would be old jeep full-size pickups like the J20, J2000, J30, J3000 etc. Chevy and Ford axles may work equally as well. Thanks! Tom. 04-08-2004, 02:31 PM #7

JCR Offroad Crusader Front Bumper with 2" Receiver HitchRock Hard 4X4 RH1015 Front Bumper in Black for 84-01 Jeep

Trying to pick an axle to upgrade to. My question to the masses is width. WMS to WMS I have an 08 2dr with a teraflex 6 long arm lift and 42 MTR's The stock axles have 1.5 adapters to clear the tires, but the front still hits the frame a bit on full turn. My thought would be 68.5 or 70.. Axle Width (unknown) This is the top dog when it comes to Dana 44's. Some believe that the Ford high pinion reverse cut Dana 44 didn't become available until after 1977. This misconception is probably because a high pinion Dana 44 wasn't offered in the F-250 until 1977. The reverse cut high pinion Dana 44 was used in 1/2 ton Ford trucks. anyone with 35's on 6.5 of lift or more on a daily driven XJ? - Page 3. also eric, can you tell me how high you measure to the roof (not including rack)? Saved by Rich LeBlanc. 1.1k. Jeep Sport Jeep Cars Jeep 4x4 Jeep Truck 4x4 Trucks Jeep Xj Mods Jeep Grand Cherokee Zj Jeep Cherokee Sport Cherokees